Part Data
- 0
- 9
- 834
Downloads Available
What does this device do?
Mix two inputs. These are 3D printed mixers that were designed to 3D printed on the Form1+ 3D printer and on Shapeways using Frosted Ultra Detail resin. The FormLabs parts are designed with 1500 micron channel diameter, but the actual dimensions are typically a few hundred microns smaller. The reactor sizes are >100 uL The Frosted Ultra Detail part is designed with a 300 micron channel. This is really the smallest diameter you can print with this process. The reactor size is ~ 1 uL
Keywords:
Fabrication Technology:
Hardware:
Publications: |
|---|